GET Car Electronics - Backup Camera Rear View Monitor Kit HD 1080P. Top Customer reviews.>>

GET Car Electronics - Backup Camera Rear View Monitor Kit HD 1080P. Top Customer reviews.>>
..

👇Top Customer reviews.👇
- LeeKooLuu did a great job in putting together the LK3 kit. Everything I would need came in the kit (and a few extras for options). So far, I really like this system. It was very price competitive for the performance specifications. It has all the features I was looking for in a backup camera kit.
The instruction pamphlet is reasonable; but there are a number of YouTube videos done by LeeKooLuu that gave me more knowledge and the confidence to proceed. The pamphlet shows a few ways to wire the system. It can be always on, on with the ignition, or (my preferred way) when reverse is engaged.
The camera appears to be well waterproof. That’s one of the “must have” components in my search for a system. I’ve seen some cameras that have shielding; but this device meets the IP69 standard. IP69K enclosures protect electronics from high pressure jet wash and steam cleaning. That’s important when you wash your vehicle.
You can control the system on/off by switching power or by a button on the monitor. It depends on where you tap into the vehicle power supply. I elected to have it work as a reverse gear-initiated backup camera. I was putting the LK3 on my pickup truck so I could get a better feel of where the rear end is located relative to the surroundings. It’s a working vehicle, not my primary mode of transportation.
I mounted the camera over the rear license plate and tested the system before full installation. The 4.3” 1080p LCD monitor worked beautifully producing a bright, clear picture. If you want to change the picture, the monitor has controls for contrast, brightness, and tint. See the world the way you want. I played with the adjustable Parking Grid Line system on the monitor to adjust the lines while I was at the back of the vehicle. That gave me an indication of how they would function when in use.
Now began hard part: how to route the wiring from the tailgate up to the cab. This was definitely the most difficult part of installation. I followed existing wires and harnesses along the frame to the cab. I didn’t have to drill a hole to route the wires internally. I found a pass-through plug that I sent the wires through. Once in the cab, it was a simple matter of removing interior trim to route the wires.
Thanks to LeeKooLuu for providing sufficient wire to complete the routing comfortably. I still have enough wire on the monitor end to place it where I want and enough on the camera/power end to change power supply, should I want. I used zip ties, electrical tape, and rubber grommets (not in the kit, but I’m compulsive). The tape was for wire covering anywhere I though the wires would rub metal and the grommets for pass-throughs on the frame.
The most challenging part had nothing to do with the LK3 kit. It was finding the Hot and Neutral wires on my reverse light. Mine has a non-standard wiring (i.e., the wires were not the colors they should be.) Having my wife at the wheel and a multimeter in my hand at the tail/reverse light solved the problem quickly. I used a military wiring tap instead of the supplied T-taps and sealed the tail light unit back up. Everything worked just as promised. The 4.3” monitor turns on when I put the truck in reverse. All that is left is for me to decide where to mount the monitor. LeeKooLuu provides multiple options for mounting as well, dash or window mount.
Great work LeeKooLuu.
..
Get Product Click >> 
..
#CarElectronics #BuyCarElectronics #SellCarElectronics #bestCarElectronics #getCarElectronics #CheapCarElectronics #discountCarElectronics #dealsCarElectronics #saleCarElectronics